Shin-Etsu develops silicone rubber for micro printing

ERJ staff report (DS)

Tokyo -- Shin-Etsu Chemical Co., Ltd. has developed a silicone rubber ideal for a stamp that deposits molecules on surfaces which is essential for micro-contact printing, a key technology of next-generation printable electronics.

Printable electronics is a new component technology that uses a printing method that does not require such manufacturing conditions as high vacuum and high temperature that were necessary in existing TFT patterning by photolithography. The applications of this new technology for flexible displays, such as for electronic paper, LCDs and organic electroluminescence (EL) film, are being widely anticipated. Among the printing methods, the micro-contact printing method is the only method that makes it possible to print on a large surface area with hyper-fine submicron meter characteristics, and this method is generating a high level of interest.

This new silicone rubber product used as the key stamp material for micro-contact printing was developed as a part of this project's research activities. The PDMS stamp, in addition to having the primary function of exactly reproducing and transferring the master mold formed by photolithography, is superior in its suitability as a printing material. Moreover, it also has the characteristic of minimizing the impurities that could become an impediment, and it also features anti-static performance. In the future, this technology is expected to be used in mold material applications in micro-total analysis systems (Micro TAS) and polymer microelectromechanical systems (Polymer MEMS).

This is an external link and should open in a new window. ERJ is not responsible for the content of external sites.

Press release from Shin-Etsu